In the majority of cases, most individuals spend quite a lot of money buying their lift truck. Therefore, it is really important to take good care of it in order to protect your investment well into the long run. It is really a great idea to know the procedures which are carried out in the maintenance and care of this piece of equipment.
One of the best ways to tell how good the engine is performing is by starting the forklift up and listening closely to see how it runs. Like for instance, if there are any knocks or misses, the machine is faulty and this should raise several concerns. Additionally listen closely for any squealing noise which come from the belts because these noises would provide you with a wealth of information.
When doing maintenance, several of the main components you will have to pay attention to include the safety warning devices, horn, the overhead guard, the lights and the gauges. Any burnt out light bulbs or faulty components need to be replaced as soon as they are noticed. It is also imperative to check the wiring.
When the above components have been checked carefully, proceed to the battery compartment to be able to see if the terminals are clean. If the terminals are not clean, be sure to clean them properly. Each cell of the battery must be checked so as to make certain that the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the machine and after that change the filters. The hydraulic filter, the transmission filter and the fuel filters must be replaced on a regular basis. Prior to fitting them, be sure to write the date on the new filters by using a permanent marker in order to keep track.
After the oil change is done and the filters have been replaced, a visual inspection of the drive axle needs to be done. If there is a grease fitting on the axle make sure to apply some grease. Inspect the engine belts for any cracks or frays. If you find any, fix the problem accordingly. Next, inspect every other component of the machine like the wheels. If any kind of problem or fault is detected, be certain to address it immediately so as to make certain the machinery is working at its safest and optimum levels.