Kinds of Warehouse Forklifts
The type of multi-purpose equipment that can be utilized both outdoors and indoors are forklifts. They are capable of working on rough terrain and are a common piece of industrial equipment found on construction sites or inside warehouses. Any warehouse forklift usually only has to be used on flat surfaces for most of their work scopes.
There are various classes of forklifts. Lower classes of forklifts are utilized in warehouses and higher classes are used more often in outdoor operation and are considered to be sturdier.
Classes of Forklifts
There are 4 kinds of warehouse forklift types out of the 7 forklift classes. The classes 5 to 7 usually describe forklifts which are utilized to tow heavy loads or operate outside on rough surfaces. Classes 1 to 3 are ideal for indoor use because they use electric propulsion. Class 4 forklifts depend on internal combustion or IC power. These models can be used indoors but because of the fumes they make, are suitable for open air warehouse applications. You will rarely find these models in strictly indoor setting.
Class One Forklifts
Forklifts which belong to Class 1 can be divided into four subcategories or lift codes. The lift codes are described as six, five, four and one. The operator of the forklift stands up in a lift code 1 forklift. In lift codes 4 through 6, he sits down. To be able to differentiate between the latter three, lift code 4 forklifts have 3 wheels, whereas lift code 5 forklifts use cushion tires. Lift code 6 forklifts utilize pneumatic tires.
A term utilized for Class 2 forklifts is narrow aisle forklifts. These kinds of forklifts are operated by a standing rider and used in tight spaces. They are perfect for spaces that are very small for a sit-down rider forklift. Class 3 forklifts or electric hand trucks could fit into tighter spaces also. The operator for class 3 either walks behind the machine or stands, depending on the particular kind of forklift. Lift models could lift pallets and loads several feet off of the ground.
Electrical Forklifts
Rather than utilizing IC or internal combustion engine forklifts, electric forklifts are commonly used in warehouses. There are some advantages and disadvantages to utilizing electrical models. For start, they could last longer and are environmentally friendly. They cost less to run and cut down greatly on noise pollution. On the downside, they do not operate well outdoors in bad climate, are more expensive up front and nearly all models need charging every 6 hours. For obvious reasons, electrical-powered forklifts are a great choice for indoor areas and warehouses most of the time.